Curved Nanoglass Dry Hanging panel
Curved nanoglass dry hanging panel is a new type of building material made of nanocrystalline glass stone, which has excellent weather resistance, stain resistance, scratch resistance and corrosion resistance. It can be used for exterior wall dry hanging decoration, forming beautiful curved effects, enhancing the aesthetic and modern sense of the building.
The installation method of curved nanoglass dry hanging panel is to first drill expansion screws into the wall, then install angle iron as fixed points, then arrange nano crystallized glass stone panels in order, and finally use caulking glue to fill the gaps between the panels. This dry hanging method can avoid the defects caused by wet pasting process, such as hollowing, cracking and falling off, and also reduce the weight of the building, improve the seismic performance.
Curved nanoglass dry hanging panel has various colors and specifications to choose from, and can be customized according to the design requirements of the building. It can not only be used for straight-shaped walls, but also for complex curved shapes such as circular, elliptical, S-shaped, etc. It can be combined with other materials such as metal, wood, glass, etc., to create diverse visual effects.
The installation process and points for attention of stone arc panels
Cylinders are used in modern buildings, especially in high-ceilinged halls. For the sake of beauty, dry-hanging stone panels are usually used to wrap the cement cylinders inside. Here we will talk about nano-microcrystalline stone arcs. Board installation precautions?
Here are three questions:
- How should the nanoglass stone circular arc plate wrap cylinder process be done?
- How does the nano crystallized glass stone circular arc plate wrap cylinder process work?
- What should be paid attention to during construction?
How should the process of nanoglass circular arc plate wrap cylinder be done?
You must be familiar with marble-wrapped columns. The effect of marble-wrapped columns gives people a thick feeling. The good effect looks like a whole stone column. The same is true for nanoglass marble stones. Let’s take a look. How is the nano glass stone circular arc plate wrapped cylinder made?
Nano-microcrystalline stone cylinder process:
1.1. Cylindrical base cleaning and repairing
Curved Nanoglass Dry Hanging panel is an environmentally friendly, energy-saving, beautiful and durable building material that can add luster and charm to the building. It is an ideal choice for future architectural decoration.
Remove the floating and sinking, filling dust, plugging holes and other parts on the surface of the cylindrical structure to ensure the cleanliness of the base.
1.2 Dried noodle measurement control
According to the requirements of the design drawings and according to the specifications of the processed nanoglass marble arc plate, vertical lines and elevation lines are released on the cylindrical surface. Pop up the vertical control line of the stone, release the horizontal control line of the plate with the elevation line as the baseline, and determine the drilling position of the pendant.
1.3 Cylindrical drilling
Use YG type M10 expansion bolts, drilling diameter 10.5 mm, hole depth 60 mm
1.4 Installation of cylindrical steel frame
The channel steel is connected and fixed on the reinforced concrete cylindrical structure with corner codes, and the No. 8 channel steel of the long vertical keel is directly welded on the steel plate fixed with expansion bolts, and the two sides are fully welded. The secondary keel is installed on the vertical keel, and the secondary keel is made of 40 mm x 40 mm x 4mm angle steel.
1.5. Stainless steel pendant installation
Determine the point after the measurement, and after the test with the stone in place, tighten the “T”-shaped piece
1.6 Curved nanoglass panel Installation
Put the numbered stone slabs in place temporarily, and use the adjustment hole of the “T” shape to adjust. Adjust the verticality and curvature of the arc-shaped slab, then remove the stone slab for local treatment, and after the adjustment meets the requirements, fasten the pendant connection
1.7 Glue injection caulking
When the curved nano stone is installed in place accurately, use marble glue to fill the gaps in the pendant and the groove, as well as the joints of the stone.
The material for stone gaps is marble glue and supporting curing agent. The ratio of marble glue to curing agent is 20:1, which is used for filling tongues of pendants and bonding stone joints.
- When installing the nanoglass arc panel, it must be processed strictly according to the number of the layout drawing, in case the size does not match, and the layout is different;
- When installing the Nanoglass cladding panel, pay attention to the direction of the stone grain for installation;
- After the Nanoglass marble installation is completed, it must be protected with a marble protective film. If there is grinding, it needs to be polished again. In addition, you should also pay attention to whether there is a deviation in the height of the seam, and you can also tap the nanoglass with your hands to see if there is any hollowing.
2. How to do the stone square column wrapping cylinder process?
We will not introduce the specific process of the square column wrapping cylinder process in detail, let’s take a look at the important steps.
2.1. Pop up vertical and horizontal control lines with ink lines according to the drawings.
2.2 Use expansion bolts to fix the corner brackets on the column to prepare for fixing the channel steel later.
2.3 It should be noted that the fixed channel steel must be in the center of each face of the column.
2.4 After fixing the channel steel, the next step is to use the angle steel as a connector to connect the external channel steel. After fixing it, make sure it meets the requirements.
2.5 The next step is to install the customized curved angle iron, so that the bones for the stone-clad columns are all set up.
The next step is to start hanging nanoglass stones and install dry pendants. The dry-hanging and stone materials are carried out at the same time. After the nano crystallized glass stone materials are dry-hanged, the gaps are treated, and finally the finished product is protected.
3. What should we pay attention to when making Nanoglass cladding columns?
3.1 After the nanoglass column cladding panel enters the site, special personnel are required to receive it to ensure the quality of the nanoglass. When entering the site for acceptance, it is necessary to check and accept each piece of stone, and carefully check whether the specifications and models of the material are correct and whether they are consistent with the bill of materials. There should be no obvious defects such as brokenness, lack of corrugation, drop corners, dark marks, cracks, local pollution, surface pits, pits, etc. After passing the acceptance inspection, pre-assemble according to the number.
3.2 Before installing the stone, it is necessary to ensure the welding quality of each node of the steel frame, the tightening strength of each part meets the specification requirements, and paint the anti-corrosion paint on the welding place. When drilling and installing the keel on the original concrete column, the position of the internal reinforcement should be avoided to avoid damage to the column structure
3.3 The connecting parts used must pass the bearing capacity check, and there should be no less than 2 rivets or bolts in each place. The anchorage strength of the connector and the main structure must be greater than the design value of the bearing capacity of the connector itself, and the bearing capacity of the main structural member directly connected to the connector must be greater than the bearing capacity of the connector.
3.4 When applying caulking glue, the force should be uniform, and the gun should be steady and slow. If the surface of the caulking glue is not smooth, you can use a stainless steel spoon to scrape it flat, and the spoon should be wiped clean whenever you use it. According to the color of the slate, you can add an appropriate amount of mineral pigments to the glue.
3.5 After one layer of stone is installed, it should be fastened and fixed with iron wires immediately. When installing the upper layer, try to avoid affecting the next layer, and ensure that the vertical and horizontal joints are straight and of the same size.
How to protect the finished product after the nanoglass stone column is finished?
Nanoglass need to be stacked on a solid and flat ground after entering the site for acceptance, and each stone is packed in foam and wooden boxes to avoid pollution or damage during the stacking process. 2. When the stone is grooved, the stone must be placed on a support with a flexible protective material to avoid scratches on the outer surface of the stone. 3. When removing the scaffolding, protect the stone after installation to avoid bumping. Well, that’s the end of today’s content.
You must be familiar with the marble-wrapped column. The effect of the marble-wrapped column gives people a thick feeling. The good effect looks like a whole stone column. Then let’s see how the stone-wrapped column is made?