How to cut nano crystallized glass stone?
We look forward to the first stage of our nanoglass factory cutting nano crystallized glass stone movies.
Cutting nanoglass video
It can be seen from the video that using the correct diamond blade to cut nano glass does not need to worry about cracking edges, inability to cut and other problems.
Why Can’t You Cut Nanoglass With A Diamond Blade For Marble Or Granite?
The Mohs hardness of nanoglass has reached above 6, which is harder than natural granite, so it cannot be cut with conventional natural granite and marble diamond blades. In order to better process nanoglass stone, we have cooperated with diamond blade manufacturers to develop special nanoglass diamond blades and drill. Now, cutting nanoglass stone is as simple as natural stone. If the blade is worn when cutting nano crystallized glass stone Seriously, the case of jumping edges and falling corners is very likely to be a problem with the diamond blade.
Where Can Buy Nano crystallized glass stone Cutting Diamond Blade?
We have cooperated with diamond blade manufacturers to develop special nanoglass diamond blades and drill. So Jaddas Stone is Cutting Diamond Blade suppliers and Nano Glass Cutting Diamond Blade factory.
Nano Glass Cutting Diamond Blade, Nano Glass Cutting Diamond Blade Suppliers and Manufacturers at jdsstone.com
As Nano-crystallized glass panel is more and more popular in making countertop, vanity top, and wall cladding, this Blade/Disc is a good solution for fabricators to cut this material, without worry of edge-crack, unable to cut, etc.
You can find nano crystallized glass stone slabs in 12×12, 16×16, and 18×18 ft sizes with 3/8 or 1/2 in thickness. Tiles are typically 24x24x3/4 in. The slabs and tiles are usually polished, but you can also get a CNC satin finish. You can also order the material in convex or concave shapes for basins and other custom designs.
Cutting of nanoglass is usually accomplished with continuous blade saws, but it can also be honed, chiseled or sandblasted.
The edges can be ground to a bullnose or chamfered.
Remnants are 100 percent recyclable.
How to cut nanoglass?
If you use a granite blade to cut the nano crystallized glass directly, and often cause chipping, this will explain to everyone how to reduce this situation.
1: Buy a special nanoglass blade because the hardness of the nanoglass is higher. Natural stone granite and marble, if you use granite blades to cut the nano glass, it is easy to collapse.
2: The newly installed blade must first cut the brick, sharpen the blade and then cut the Nanoglass(Heat and sharpen the blade for at least 15 minutes before starting any cutting.).
3: You should also make sure that you have sufficient and constant cooling water throughout the process. You should also be sure to check if the cutting table is stable as its balance can cause damage to the stone.
4: Be aware of the cutting speed during the process: the regular bed / table speed should be between 2.5 and 4m / min. To cut Nano white granite, the first cut should be the length of the plate and the second, in the direction of the plate width.
5: For cuts made in sheets above 18 mm, we recommend making the cut in two steps. In the first step, one blade should reach half the plate and in the second step, it should cover another half to finish the cut.
To perform this procedure, a plate cannot have any lateral movement. It is imperative that the diamond disc is perfectly aligned with a cut direction.
If you have any questions or buy Nano Glass Panel Cutting Diamond Blade, please free contact us. email@example.com
Nano Glass Cutting Blade
Cutting Blade for Nanoglass Stone
Cutting Diamond Disc for Nanoglass Stone
tags: wholesale Nano Glass Cutting Diamond Blade, Nano Glass